Titan Mini-Recorder
16 Channel Data Acquisition Recorder with Multi-Sensor Support
Key Features:
- Very High Speed 16 Channel Data Acquisition Recorder with multi-sensor support
- Stand-alone recording to SD memory card with onboard controls for recording and calibration
- High performance analog front-end with full Balance and Calibration loopback features
- ICP sensor support
- GPS recording supported
- Records directly to a PC via USB
- Interfaces with other Titan products to provide up to 320 analog channels, plus digital channels
Applications
- Durability & Fatigue
- Vehicle Dynamics
- Acoustics
- Noise & Vibration Analysis
- Ride Quality Assessment
- Shock
Specifications
| Number of Channels | 16 fault-tolerant channels on DB9F connectors |
| Sample Rate | High Speed Operation: up to 60,000 samples per second per channel Low Speed Operation: up to 1200 samples per second per channel |
| Resolution | Utilizes 24-bit A/D converters; 16-bit exported |
| Input Impedance | > 10 Meg (Input Dividers OFF) = 16K (Input Dividers ON) |
| Programmable Gain | From ±1/16 to ±512; ±32V Full scale input voltage maximum |
| Programmable Filter | 10 pole Linear Phase tracking fi lter (High Speed operation) 8 pole Butterworth fi lter (Low Speed operation) |
| Calibration Modes | Resistive (RCal): ±100K Ohms per channel (shunt calibration) Voltage (VCal): Precision positive and negative calibration voltages provided |
| Excitation Value / Current | Precision per-channel programmable, 2 to 11.5V @25mA with overload protection |
| Analog Sensor Support | Strain Gauge: Full/Half/Quarter Bridge 350Ω resistive type, with on-board bridge completion Voltage: Up to ±32 Volts Thermocouples: Types J, K, & T Tachometer/Totalizer: Frequencies up to 7KHz ICP Sensors: 2.5mA |
| Digital Sensor Support (via Digital Pod) | CAN/CAN FD, SAE J1939, ISO 15765 (ECU CAN), GPS, IMU (3DM-GX3/3DM-GX5), and multiple WFT protocols including Kistler and Michigan Scientific |
| GPS | Optional on-board GPS support for the Garmin 18X-5Hz w/PPS or U-Blox GNSS sensor |
| PC Operation | Remote recording and control via USB |
| Stand-alone Operation | Via on-board switches or Titan Remote Control (Mars Labs CBL-RMT) |
| Recording Media | Secure Digital (SD) memory card, 32GB (furnished) |
| Expansion Slot (1) | Supports optional Mini-Digital Pod (digital input) or Mini-DAC (analog output) expansion cards |
| Power Requirements | 10 VDC (min), 11-32 VDC recommended; 3 Watts (base unit, sensors not driven) |
| Dimensions / Weight | 17.6 cm x 10.6 cm x 3.7 cm (L x W x H) / Weight 540g |
Optional Capabilities
Internal Digital Expansion (GPS, IMU, CAN, WFT)
Digital Input Expansion Card
Optional Add-on
Features/Specifications:
- Adds digital input capability to Titan Mini-Recorders • Provides dual CANbus inputs, plus GPS and Serial data inputs
- Each CANbus input supports SAE J1939, ISO 15765 (ECU CAN), and multiple WFT protocols, including Kistler and Michigan Scientific
- CANbus rates up to 1Mb
- Support for the 3DM-GX3 Inertial Measurement Unit [6 DOF channels and 3 Euler channels]
- GPS support for the Garmin LX18-5Hz [12 channels + PPS]
Digital Analog Converter (DAC)
Analog Output Expansion Card
Optional Add-On
Features/Specifications:
- Adds analog output capability to Titan Mini-Recorders for monitoring and control applications
- Full 16 channel operation with isolated outputs
- Input signals may be recorded when connected to a PC or Titan CPU, as well as monitored in real-time on the PC
- Output is automaticallly offset to include the balance value used for the sensor
- Output Sample Rate: 1200 samples per second
- Output Bandwidth: 150 Hz
- Output Voltage Range: ±10V
Downloads
| File | File Type | Description |
|---|---|---|
| Printable Datasheet | ||
| BMS User Manual |