Titan Mini-Recorder
16 Channel Data Acquisition Recorder with Integrated CPU01 and GPS
Key Features:
- 16 Channel High performance analog front-end with multiple sensor type signal conditioning in each DB9 connector.
- Support for resistive bridge sensors (strain gauge, load cells, accelerometer, etc.), voltage, thermocouple (J/K/T), tachometer/totalizer, and ICP sensors
- Integrated CPU01 adds Ethernet connectivity with SFTP for remote data downloading
- Integrated U-Blox GPS with external antenna connector enables the ability to trigger recording on Speed Over Ground (SOG)
- Support PPS allowing syncronization of multiple recorders
- 11-32VDC Power with optional external battery backup connection
- Compact size, light weight and low power consumption make the device suitable for in-vehicle applications
Applications
- Durability & Fatigue
- Vehicle Dynamics
- Acoustics
- Trains
- Noise & Vibration Analysis
- Ride Quality Assessment
- Shock
- Commercial Fleet
Specifications
| Number of Channels | 16 fault-tolerant channels on DB9F connectors |
| Sample Rate | High Speed Operation: up to 10,000 samples per second per channel Low Speed Operation: up to 1200 samples per second per channel |
| Resolution | Utilizes 24-bit A/D converters; 16-bit exported |
| Input Impedance | > 10 Meg (Input Dividers OFF) = 16K (Input Dividers ON) |
| Programmable Gain | From ±1/16 to ±512; ±32V Full scale input voltage maximum |
| Programmable Filter | 10 pole Linear Phase tracking fi lter (High Speed operation) 8 pole Butterworth filter (Low Speed operation) |
| Calibration Modes | Resistive (RCal): ±100K Ohms per channel (shunt calibration) Voltage (VCal): Precision positive and negative calibration voltages provided |
| Excitation Value / Current | Precision per-channel programmable, 2 to 11.5V @25mA with overload protection |
| Analog Sensor Support | Strain Gauge: Full/Half/Quarter Bridge 350Ω resistive type, with on-board bridge completion Voltage: Up to ±32 Volts Thermocouples: Types J, K, & T Tachometer/Totalizer: Frequencies up to 7KHz ICP Sensors: 2.5mA |
| GPS | Integrated U-Blox NEO-M9N with external antenna |
| Connectivity | Ethernet (Static IP) or USB |
| Recording Media | USB Mode: Secure Digital (SD) memory card, up to 32GB supported Ethernet Mode: Internal Storage (SD), 512GB Standard other options available |
| Power Requirements | 10 VDC (min), 11-32 VDC recommended; 5 Watts (base unit, sensors not driven) |
| Dimensions / Weight | 17.6 cm x 10.6 cm x 5.7 cm (L x W x H) / Weight 700g |