Titan Data Acquisition System Overview
Titan DAQs are designed with flexibility and scalability in mind. Our most popular input module, the BMS16, supports a wide range of sensor types, and on board recording making it an easy choice for most testing applications. The TCS (Titan Control Software) is available at no additional cost and can be downloaded and run in demo mode.
Need more channels? Our Channel Expanders make it easy and economical to expand as needed.
Supported Sensors
- Strain gauges
- load cells accelerometers
- Single-ended and Differential Voltage
- Thermocouples (Type J/K/T)
- Tachometer / Totalizer
- ICP sensors.
- Digital (CAN / GPS / IMU)
Analog / Digital
- Very High Speed (60Khz) 16 Channel Data Acquisition Recorder with multi-sensor support
- Support for resistive bridge sensors (strain gauge, load cells, accelerometer, etc.), voltage, thermocouple (J/K/T), tachometer/totalizer, and ICP sensors
- Integrated quarter and half-bridge completion
- Per-channel selectable excitation
- Convenient panel controls for recording and calibration operations
- Optional digital support for CANbus, IMU, and GPS
Analog
- Very High Speed (60Khz) 16 Channel Data Acquisition Recorder with multi-sensor support
- Analog Sensor inputs via DB37 connection
- Stand-alone recording to SD memory card with onboard controls for recording and calibration
- High performance analog front-end with full Balance and Calibration loopback features
- Compact size and low power consumption make
- the device suitable for in-vehicle applications
- GPS and Digital Sensor recording supported
CAN, IMU, GPS, WFT
- 6 dedicated CAN/CAN FD + GPS, IMU and Quad Encoder inputs.
- Adds digital input capability to Titan Channel Expanders
- Supports SAE J1939, ISO 15765 (ECU CAN), and multiple WFT protocols, including Kistler and MST (Michigan Scientific)
- Supports Lord Microstrain 3DM-GX3 Inertial Measurement and Garmin GPS 18-5Hz
Analog / Digital
- Supports multiple sensor types via 16 DB9 connector inputs
- Support for resistive bridge sensors (strain gauge, load cells, accelerometer, etc.), voltage, thermocouple (J/K/T), tachometer/totalizer, and ICP sensors
- Integrated quarter and half-bridge completion
- Per-channel selectable excitation
- Convenient panel controls for recording and calibration operations
- Optional digital support for CANbus, IMU, and GPS
Analog / Digital
- Supports multiple sensor types via 16 Bendix connector inputs
- Support for resistive bridge sensors (strain gauge, load cells, accelerometer, etc.), voltage sensors, thermocouple (J/K/T), and tachometers/totalizers
- Integrated quarter and half-bridge completion
- Per-channel selectable excitation
- Convenient panel controls for recording and calibration operations
- Optional digital support for CANbus, IMU, and GPS
Thermocouple
- Supports J, K, & T-type thermocouples via 16 mini-TC jacks
- Convenient panel controls for recording and calibration operations
- Optional GPS support
ICP DAQ
- Dedicated ICP support (2.5mA)
- Up to 60K Hz scan rate
- Convenient panel controls for recording and calibration operations
- Available with 16 top-mounted BNC inputs or twin rear-mount DB9 inputs
Analog / Digital
- Small footprint multi-sensor recorder
- Supports multiple sensor types via rear-mount DB37 connector input
- Support for full bridge resistive sensors (strain gauge, load cell, accelerometers, etc.), voltage, tachometer/totalizer and thermocouples (J/K/T)
- Provides fixed 2.048V excitation
- Convenient panel controls for recording and calibration operations
CAN, IMU, GPS, WFT
- Adds digital input capability to Titan Mini-Recorders
- Available as an internal add-on to the BMS and BSG input modules or as an external add-on
- Provides dual CAN bus inputs, plus GPS and Serial data inputs (common used with an IMU)
- Supports SAE J1939, ISO 15765 (ECU CAN), and multiple WFT protocols, including Kistler and MST (Michigan Scientific)
- Supports Lord Microstrain 3DM-GX3 Inertial Measurement and Garmin GPS 18-5Hz
Analog / Digital / CPU
- Supports multiple sensor types via 16 DB9 connector inputs
- Included all the features of a BMS16
- Integrates a CPU01 and GPS for Ethernet connectivitiy and GPS Triggering
Output Modules
Titan Data Acquisition (DAQ) Systems offer universal signal conditioning, low power consumption, convenient SD card storage, and easy-to-use software.
Analog Output
- 16 channel Digital to Analog (DAC) output module.
- Seamless integration with Titan Input Modules
- Input signals may be recorded when connected to a PC or Titan Channel Expander as well as monitored real-time
- Integration with MTS and other simulation systems
Analog Output
- Adds analog output capability to Titan Mini-Recorders for monitoring and control applications
- Full 16 channel operation with isolate outputs
- Input signals may be recorded when connected to a PC or Titan Channel Expander as well as monitored real-time
Custom
Hardware & Software
Mars Labs works closely with customers to design solutions tailored to our customers missions. Pictured above is a custom 8 channel DAQ complete with signal conditioning designed to integrate directly into a customers product. Contact us today to discuss your needs.