TITAN INPUT MODULE SPECIFICATION COMPARISON |
||||
CDF | BMS | CMS | CAI | |
Titan Advantage | Our smallest, most cost‐effective very high speed (VHS) Titan | Our ‘do‐it‐all’ workhorse Titan | Our very high speed (VHS) version of the ‘do‐it‐all’ workhorse Titan | Our most cost‐effective very high speed (VHS) Titan with ICP support |
Number of channels | 16 | 16 | 16 | 4 / 8 / 16 |
Input Connector | DB25 | DB9 | DB9 | BNC (top) or DB9 (rear) |
Max Sample Rate | 60K s/s (Very High Speed) 1.2K s/s (Low Speed) |
10K s/s (High Speed) 1.2K s/s (Low Speed) |
60K s/s (Very High Speed) 1.2K s/s (Low Speed) |
60K s/s (Very High Speed) 1.2K s/s (Low Speed) |
Resolution | 24‐Bit A/D conversion; 16 bit exported | |||
Input Impedance | 40K (divider on Gain = 1) 10 Meg (all other gains) |
10 Meg (dividers OFF) 16K (dividers ON) |
40K (divider on Gain = 1) 10 Meg (all other gains) |
40K (all modes) |
Programmable Gain | ±1/16 to ±512; ±32 V Full Scale Input Max |
±1 to ±8 ±8V Full Scale Input Max |
||
Programmable Filter | 10 Pole Linear Phase (HS) 8 pole Butterworth (LS) |
10 Pole Linear Phase | ||
High Pass Filter Cutoff (ICP inputs) |
N/A | 1 Hz | 1 Hz | 0.4 Hz |
Calibration Modes | Resistive (RCAL): ±100K Ohms/channel (shunt) Voltage (VCAL): Precision ± calibration voltages |
Voltage (VCAL): Precision ± calibration voltages |
||
Analog Sensor Support | Strain Gauge, Voltage, Thermocouple, Tach/Totalizer |
CP Sensors, 2.5mA current 20V compliance |
||
Digital Sensor Support | N/A | CAN FD, SAE J1939, GPS, IMU, and WFT Protocols | N/A | |
GPS | Dedicated on‐board GPS support | |||
PC Operation | Remote recording and control via USB | |||
Expansion Slot | N/A | Yes | Yes | N/A |
Dimensions | 13.5cm x 10.6cm x 3.7cm | 17.6cm x 10.6cm x 3cm | 17.6cm x 10.6cm x 3cm | 13.5cm x 10.6cm x 3.7cm |
Max Data Rate w/CPU Expander |
16 Channels @ 8KHz | 16 Channels @ 32KHz | 16 Channels @ 8KHz | 16 Channels @ 32KHz |
Baud Rate | 3M / 12M | 3M | 3M / 12M | 3M / 12M |